Water leak detection in Gold Coast
Uncategorized

Catching At The Right Moment

Introduction

Water leakage is a very small thing when you think about it, however, it can turn into your worst nightmare if you do not take it seriously the moment it starts happening or the moment you noticed it. Sometimes it is the faucet which is leaking or sometimes it can be the toilet. Or it can be any other pipe which can have the problem of leakage. When the leakage is not on the obvious front, it is very tough to find out the main problem and which pipe is leaking. At times it is tough to even surely say if there is a leakage problem or not.

Water leak detection in Gold Coast is apparently very easy. You have the main vault of water which deals with the flow of water in the house. Similarly, you have a water meter. You just need these two things and you are good to go with the water leakage problem. In this article, we are going to discuss how you can track down the water leakage problem happening in your house. You can also use CCTV drain inspection in Gold Coast.

Water Leak Detection

  • First of all, stop the usage of water in your house. Make sure that all the faucets and water pipes are closed and there is no running water in the house. Once you are sure with this, it’s time to go and check the water meter.
  • Now, while looking at the water meter, search for a leak indicator. It does not really matter which company’s meter you are using, there is always a leak indicator in the meter. It can either be small or big, in triangular form or in a circular form with a small dial which can rotate.
  • Check if the leak indicator is still moving even if there is no running water in your house at that moment. If yes, then you have a leakage problem. If no, then there is no leakage problem. If the leak indicator is moving, there are two possibilities. The leakage can be inside the house or outside the house.
  • You can find it out by closing the main water vault. Once the flow of water stops running in the house. Check meter again. If the leak indicator stops moving then it means the leakage is inside the house but if it is still moving then the leakage is between the meter and the vault area.
Author Image
Artfair Artist