How To Make Your Own Diy Plantation Shutter
Diy Plantation shutter is a type of window shutter that consists of horizontal louvres mounted in a frame. The louvres can be tilted open or closed to control the amount of light and privacy. They are often used in conjunction with curtains or drapes.
They are a great way to save money and get the exact look you want for your home. Follow the tutorial below to learn how to make your own plantation shutter.
What You’ll Need
You’ll need a few tools and materials to make your own plantation shutters. The most important things are a table saw, mitre saw and router. If you don’t have those tools, you can rent them from your local hardware store or home improvement center. You’ll also need screws, a drill and sandpaper.
Cutting The Frames
The first step is to cut the frames for your shutters out of plywood or another type of wood that’s suitable for window frames. You can use a table saw or mitre saw to make these cuts, depending on the thickness of your material. For example, if you’re using 1/4-inch-thick plywood, it will be easier to use a mitre saw instead of trying to cut through all that thick material with just a table saw blade alone.
Assembling The Shutter
The next step in making your own plantation shutters is assembling the shutter. This can be done by either using a drill or simply hammering nails into place. The nail holes will eventually be covered up with louvres, so it’s not necessary to create perfect joints. However, if you have access to both hands, we recommend using a hammer and nails instead of a drill since it will make the process much easier and faster.
Adding The Louvers
Now that we have the frame of our DIY shutters, it’s time to start adding the louvres. The most common size of louvres used in plantation Indoor shutters is 2×2 inches. You can buy them pre-made or make your own with a jig saw. The main thing you want to be sure of when cutting these out is that they’re all even and straight.
Finishing The Plantation Shutter
Once all your louvres are installed and everything looks good, now it’s time to finish up the rest of your DIY plantation shutter project.
You’ll need to attach the top piece of wood for each panel into place with nails or screws. This will hold everything together and make sure that your plantation shutters don’t come apart over time. Don’t worry too much about making sure this part looks perfect; nobody will see it unless they’re standing right next to it.
Related Source: Interior Shutters, Internal Shutters
